Description
Motorizations for satellite dishes mod. HH100
Rotor SAT HH is a motor that
allows to point any satellite dish towards all visible satellites in the polar
orbit. The characteristics that make Rotor SAT HH particularly valid are as
follows:
- Maximum precision
- Mechanical robustness
- Connection without external feeding, only by coaxial cable
- Reduced dimensions
- Maximum easiness of installation
Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible receivers , where the rotation of the motor automatically begin when selecting the required channel. For all those receiver not providet with DiSEqC, STAB has developed the interfaces MS 220, MP 01, MP 02 (page.5) to drive the motors by the Tv cable.
Operating protocol DiSEqC 1.2 Maximum antenna diameter 100 cm Maximum antenna weight 12 kg Pole support diameter 50 - 83 mm Antenna support length 125 mm Antenna support diameter 54 mm Rotation angle ±62° Rotation speed 1,8°/s(18V);1,2°/s(13V) Operating power supply 13 / 18 Vdc Consumption in stand-by mode 30 mA Consumption in operating mode 190 mA Starting consumption (max) 350 mA Operating temperature -40°C - +80°C Maximum relative humidity 100% Programmable positions (DiSEqC1.2) 49 satellites Preset positions (DiSEqC1.2) 28 satellites Programmable positions (USALS) No limits Connectors Type F Connection Coaxial Mechanical limits ±70° Software programmable limits 5° - 62° Fine tuning Pulse of 0,1° Inclination on the pole 15° - 70°
